Best Proxies for Octoparse in 2026 (+ How to Set One Up) | DataImpulse

Octoparse is a popular no-code web scraper — you build extraction tasks visually, no Python required. But scrape a real target at volume and you’ll hit IP bans, so Octoparse relies on proxies. You have two routes: Octoparse’s built-in IP proxies (residential, auto-rotating, ~$3/GB) or your own proxies on local runs (cheaper, but with one important limitation). This guide shows exactly how to set up a proxy in Octoparse, the built-in-vs-bring-your-own trade-off, and the best proxies for Octoparse in 2026 — with DataImpulse at $1/GB as the value pick for custom proxies.

I’m Andrii Byzov, an AI-Native Fractional CMO who runs no-code and code scrapers side by side. Below: the exact UI steps, the no-authentication gotcha (and the IP-whitelist workaround), and the providers worth your budget.

How to Set Up a Proxy in Octoparse

Option 1 — Octoparse’s built-in IP proxies (easiest)

On premium plans, enable Octoparse’s own residential IP proxies in the task’s anti-blocking settings. They rotate automatically and work on both local and cloud runs — the simplest path, at about $3/GB with a minimum credit balance. Set a rotation interval that suits the target.

Option 2 — Bring your own proxies (local runs)

To use a cheaper provider like DataImpulse, add your own proxies to a local task:

1. Open your task and go to Task settings → Anti-blocking settings.
2. Tick “Use IP proxies”.
3. Enter each proxy as host:port — e.g. gw.dataimpulse.com:823 (HTTP only; separate host and port with a colon).
4. Set the rotation interval (match it to your provider’s rotation where applicable).
5. Run the task locally — custom proxies don’t apply to Cloud runs.

The catch: Octoparse doesn’t accept proxies that need a username and password. Since most residential gateways authenticate with credentials, the fix is IP whitelisting: in your provider dashboard, authorize the public IP of the machine running Octoparse; then the gateway accepts the connection with no credentials, and you can enter it as plain host:port. DataImpulse supports IP whitelisting, so you whitelist your IP once and add gw.dataimpulse.com:823. See the DataImpulse tutorials for whitelisting steps.

Best Proxies for Octoparse at a Glance

The picks, briefly

DataImpulse is the value pick for custom proxies in Octoparse — residential at $1/GB pay-as-you-go, roughly a third of Octoparse’s ~$3/GB built-in rate, on a 90M+ pool across 195 countries, with IP whitelisting so it works around Octoparse’s no-credentials limitation. Datacenter is $0.50/GB and mobile $2/GB. Traffic never expires; published success rate 99.51%; G2 4.8/5. For local runs at volume, bringing DataImpulse beats paying the built-in premium.

Octoparse’s built-in proxies (~$3/GB) are the easiest path — auto-rotating residential that work on cloud runs too, with zero setup. Bright Data (~$8/GB regular, ~$4 promo) and Oxylabs (from $6/GB, documented Octoparse guide) are the enterprise pools. Decodo (from $3.75/GB) is the mid-market value option, IPRoyal (from $7.35/GB) the cheap PAYG entry, SOAX ($3.60/GB) adds mobile, and Webshare (free tier, datacenter from $2.99/mo) is the budget self-serve start. All support IP whitelisting, which is what makes them usable in Octoparse.

Built-in vs Bring-Your-Own Proxies in Octoparse

The trade-off is convenience versus cost and control. Built-in IP proxies (~$3/GB) need no setup, rotate automatically, and are the only option for Cloud extraction — ideal if you run in the cloud or want zero configuration. Your own proxies (e.g. DataImpulse at $1/GB) are cheaper and let you pick geos and providers, but work only on local runs and require IP whitelisting because Octoparse won’t pass credentials. A common pattern: built-in proxies for cloud tasks, your own cheaper residential for high-volume local runs.

Common Octoparse Proxy Mistakes

• Trying to use a username/password proxy. Octoparse won’t accept credentials — use IP whitelisting and enter the gateway as host:port.
• Expecting custom proxies on Cloud runs. Cloud extraction uses Octoparse’s built-in proxies only; your own work on local runs.
• Adding an HTTPS/SOCKS URL. Octoparse custom proxies are HTTP IP:port — no scheme, no SOCKS.
• Datacenter IPs on defended targets — they get blocked fast; use residential.
• Forgetting to re-whitelist. If your machine’s public IP changes, re-authorize it in the provider dashboard or the gateway will reject the connection.

Which Proxy Type for Octoparse — Residential, Datacenter, or Mobile?

• Residential ($1/GB) — the default for defended targets (e-commerce, SERPs, social). If you pick one, pick this.
• Mobile ($2/GB) — real carrier IPs for the hardest targets and mobile-web surfaces.
• Datacenter ($0.50/GB) — cheapest for unprotected sites and your own infrastructure; don’t point it at anti-bot-heavy targets.

DataImpulse offers all three with IP whitelisting on one account, so an Octoparse task can use the right tier for its target.

How to Start with DataImpulse + Octoparse

Step 1. Create a DataImpulse account ($5 / 5GB intro, never expires) and, in the dashboard, whitelist the public IP of the machine running Octoparse so no credentials are needed.

Step 2. In Octoparse, open Task settings → Anti-blocking settings → Use IP proxies, and add gw.dataimpulse.com:823 as host:port. Set a rotation interval.

Step 3. Run the task locally (custom proxies don’t apply to Cloud). See the DataImpulse tutorials for whitelisting and the residential proxies page.