In this Article
R web scraping has one trap that swallows more hours than everything else combined, and it is worth naming in the first paragraph: rvest::read_html given a URL opens its own connection, so every proxy setting, header and cookie you configured in httr2 is silently ignored. Fetch with httr2, then parse the string.
Beyond that, the stack is comfortable. httr2 handles proxies, retries and throttling with a pipe-friendly API, rvest turns HTML into tibbles with CSS selectors, and the result lands directly in the analysis you were going to run anyway.
Key Facts
- The stack in R: httr2 for fetching, rvest for parsing, and chromote when a page renders client-side.
- Proxy setup is one object, not one line per request. Configure it once on the client and reuse that client, or you lose connection pooling and session coherence.
- The mistake that costs the most time here: rvest::read_html(url) ignores your proxy.
- Rotation belongs to the session, not the request. One logical task keeps one exit; rotating mid-session breaks cookies and invites challenges.
- Use R when the analysis lives in R already and you want the data to land straight in a data frame or tibble. Avoid it when the job is a large production crawler that needs scheduling, retries and browser rendering.
How do you route R requests through a proxy?
Configure the proxy on the client once, then reuse that client for every request in the session. Here is the minimal working form with authentication.
library(httr2)
resp <- request("https://example.com") |>
req_proxy("gw.dataimpulse.com", port = 823,
username = "USER", password = "PASS") |>
req_timeout(30) |>
req_perform()
html <- rvest::read_html(httr2::resp_body_string(resp))
Three details matter more than the syntax. The credentials belong to the gateway, not to the target site. The timeout is not optional, because a proxy adds a hop and a hung request holds a worker. And the client is the unit of identity: the same client means the same connection pool, the same cookies and, with a sticky session, the same exit address.
What does the 3-step fetch and parse split look like?
Keep three concerns apart, and debugging stops being guesswork. We call it the 3-step fetch and parse split.
| Part | What it owns | In R |
|---|---|---|
| 1. Transport | Connection, proxy, timeouts, retries, TLS | httr2 |
| 2. Parsing | Turning bytes into fields, and failing loudly when the markup moved | rvest |
| 3. Scheduling | Concurrency per host, pacing, backoff, deduplication | Your own worker pool or queue, bounded per target |
In R the split matters for a reason specific to the language: fetching is expensive and irreproducible, parsing is cheap and repeatable. Save the raw responses to disk after the fetch, then iterate on the parsing code as many times as you like without touching the target again. Analysts who skip that step end up re-crawling a site three times because a column name changed.
When a scrape breaks, the first question is which part broke. A non-200 status is transport. A 200 with empty fields is parsing, or a page that renders client-side. Success that decays over minutes is scheduling. Mixing the three into one function is why so many scrapers are rewritten rather than fixed.
httr2 replaced httr as the maintained client; if you inherit httr code, use_proxy() is its equivalent and the same fetch-then-parse rule applies.
What goes wrong in R specifically?
Three problems account for most lost time in R, and none of them is the target blocking you.
rvest::read_html(url) ignores your proxy. This is the single most common R scraping bug. Passing a URL to read_html makes rvest fetch it with its own connection, so your httr2 proxy, headers and cookies are all dropped. Fetch with httr2 first, then parse the string, as above.
Data frames hide failures. Binding rows from a failed fetch silently produces a smaller data frame rather than an error. Check status codes explicitly and count rows per run.
Sequential by default. R loops are one request at a time. For anything beyond a few hundred pages use httr2’s request pool or furrr, with a concurrency cap.
None of these are exotic, and all of them look like a blocked scraper from the outside, which is why the first response is so often to buy proxies for a problem that lives in the client. Our guide to 403 Forbidden errors when scraping walks the isolation steps in order.
How do you fetch many pages in R without melting anything?
Use httr2’s request pool with an explicit cap, or furrr when the work is already in a purrr shape.
reqs <- lapply(urls, function(u) {
request(u) |>
req_proxy("gw.dataimpulse.com", port = 823,
username = "USER", password = "PASS") |>
req_timeout(30) |>
req_throttle(rate = 4 / 1) # 4 requests per second, ceiling
})
resps <- req_perform_parallel(reqs, on_error = "continue")
Two habits matter more than the parallelism. Set on_error to continue so one dead URL does not abort a three-hour run, and keep the raw responses before parsing, because re-fetching is expensive and re-parsing is free.
Which R packages are worth using?
| Package | Use it for | Honest note |
|---|---|---|
| httr2 | All fetching, proxies, retries, throttling | The maintained client. httr still works but new code should start here |
| rvest | Parsing and selecting | Excellent at parsing, dangerous at fetching: read_html on a URL ignores your proxy |
| xml2 | XPath and raw XML work | Underneath rvest anyway, useful when selectors run out |
| chromote | Pages that render client-side | Drives headless Chrome from R; slower and heavier, use sparingly |
| polite | robots.txt compliance and rate limiting | Small package that encodes good manners; worth adding to research code |
For analysis work the pattern that scales is simple: fetch with httr2 into a list of responses, save that list to disk, then parse into a tibble. The fetch is the fragile part and should only happen once.
When is R the wrong tool?
Use R when the analysis lives in R already and you want the data to land straight in a data frame or tibble. Avoid it when the job is a large production crawler that needs scheduling, retries and browser rendering.
The deciding factor is maintenance, not capability. A crawler written in the language your team uses daily survives the next markup change; a clever one in an unfamiliar language is abandoned at the first breakage. If the honest answer is that R is the wrong home for this job, a small crawler elsewhere writing into the same database is a legitimate design, not a defeat.
Two things live outside this page because they are the same in every language, and repeating them here would only make them harder to keep current. Session and rotation rules, including why a journey must hold one sticky exit, are in proxy rotation best practices. What to do when a request is refused, and how to tell a network problem from a client problem, is in 403 Forbidden when scraping, and the legal framing is in is web scraping legal.
On the exit itself: rotating residential for public pages, sticky for journeys, datacenter for APIs and open data. DataImpulse residential is $1 per GB across 195 countries with country targeting included, and the comparison is in best proxies for web scraping.
Frequently Asked Questions
How do I set a proxy in R?
Configure it on the client object rather than per request: with httr2 you set the proxy host, port and credentials once, then reuse that client. Reusing it keeps the connection pool, the cookie jar and the exit address consistent, which is what makes a session look coherent.
Which library should I use for parsing in R?
rvest is the practical default. Keep parsing separate from fetching: the client owns the network and the parser owns the markup, so that a failure tells you immediately which of the two broke.
Do I need a headless browser for R?
Only when the fields are rendered client-side. Fetch the page plainly and search the HTML for one known value first: if it is there, skip the browser entirely. When you do need one, chromote when a page renders client-side is the option in this ecosystem, and it costs an order of magnitude more per page in time and memory.
rvest::read_html(url) ignores your proxy?
This is the single most common R scraping bug. Passing a URL to read_html makes rvest fetch it with its own connection, so your httr2 proxy, headers and cookies are all dropped. Fetch with httr2 first, then parse the string, as above.
Is R a good choice for web scraping?
It is a good choice when the analysis lives in R already and you want the data to land straight in a data frame or tibble. It is the wrong choice when the job is a large production crawler that needs scheduling, retries and browser rendering. The deciding factor is usually maintenance rather than raw capability: the scraper written in the language your team uses daily is the one that survives the next markup change.
Point your R client at a reliable exit
The snippet above works with one credential change: DataImpulse residential gives geo-accurate exits at $1 per GB across 195 countries, rotating or sticky, over HTTP, HTTPS and SOCKS5. Create an account and test one target from your R client before scaling the job.
Related: 403 Forbidden when scraping · Crawl4AI proxy setup · proxy setup in Go, Kotlin, Scala, Perl and Elixir.
Last updated: September 17, 2026.

State/City/Zip/ASN Targeting 



